#daemon configuration telnet_port 4444 gdb_port 3333 #interface interface ft2232 ft2232_layout "usbjtag" ft2232_device_desc "Dual RS232 A" #ft2232_vid_pid 0x0403 0x6010 jtag_speed 6 #use combined on interfaces or targets that can't set TRST/SRST separately reset_config trst_and_srst #jtag scan chain #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 4 0x1 0xf 0xe #target configuration daemon_startup reset #target #target arm7tdmi target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4 run_and_halt_time 0 30 working_area 0 0x40000000 0x40000 nobackup #flash configuration flash bank lpc2000 0x0 0x40000 0 0 lpc2000_v1 0 14765 calc_checksum flash bank cfi 0x80000000 0x400000 2 2 0 # For more information about the configuration files, take a look at: # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger #ft2232_device_desc "Olimex OpenOCD JTAG A" #ft2232_vid_pid 0x15BA 0x0003